|
Next: new LCD TV or wait for the 360 extender
|
| Author |
Message |
External
Since: Oct 14, 2005
Posts: 7
|
(Msg. 16) Posted: Sat Oct 15, 2005 4:24 am
Post subject: Re: Rollup 2 Error 3 & no Tuner found?? [Login to view extended thread Info.]
Archived from groups: microsoft>public>windows>mediacenter (more info?)
|
|
|
Robert, also THANK YOU! Where can I reinstall this Net 1.1 runtime is this
for Windows.
Im actually a Systems Engeneer for Apple and have started playing with MCE
and have had one hurdle to the next - again thanks for the help guys.
"Robert Schlabbach" wrote:
> mscoree.dll is a core component of the .NET runtimes. Apparently, you have
> a wrong (old) version of this file on your machine. Try reinstalling the
> ..NET 1.1 runtimes to fix this.
>
> Regards,
> --
> Robert Schlabbach
> e-mail: robert_s.RemoveThis@gmx.net
> Berlin, Germany
>
> "dopher" <dopher.RemoveThis@discussions.microsoft.com> wrote in message
> news:53C8580C-A093-4802-BAFF-2B62E4162288@microsoft.com...
> > As soon as I ran this a dialog popped up:
> >
> > ngen.exe - Entry Point Not Found
> > The procedure entry point GetRequestedRuntimeVersion could not be located
> in
> > the dynamic link library mscoree.dll
> >
> > ** also ngen.exe processes with 00 CPU/604K Mem usage load keep
> populating
> > In the time I wrote this I want from 5 entries to like 10.
> >
> >
> >
> > "mcedude-2005" wrote:
> >
> > > Try the following from a command prompt:
> > >
> > > - C:\windows\Ehome\medctrro.exe /o RunOnce >nul
> > >
> > > wait 2 minutes or until CPU/Processor activity in task manager is 0%
> > >
> > > This should run through the script that media center uses on first boot
> > > to install anbd register the components and services. After running,
> > > check the file C:\windows\medctroc.Log for error messages at the time
> > > you ran the above command. If there are no errors , hit the green
> > > button and see if it works.
> > >
> > >
>
> |
|
| Back to top |
|
 | |
External
Since: Jul 14, 2005
Posts: 19
|
(Msg. 17) Posted: Sat Oct 15, 2005 6:45 am
Post subject: Re: Rollup 2 Error 3 & no Tuner found?? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks for all your help. I am up and running, not so sure it was worth all
the hasle but it does work. I have to reset all my series and a few other
things but all seems well. When I remember back I did have an issue when one
of the .net installs had a problem from the windows update. That must have
beem mine and many others who are having problems with the upgrade.
Definately worth removing all the .net stuff and then installing. The update
gets all the lastest .net fixes and the roll up in one go.
So again thanks for all you help and everyone else who made suggestions.
Alan
"mcedude-2005" wrote:
> That's good to hear Alan B. Let us know how everything is working.
> Perhaps it was a corrupt .net install.
>
> |
|
| Back to top |
|
| |
External
Since: Sep 22, 2005
Posts: 1
|
(Msg. 18) Posted: Sat Oct 15, 2005 8:28 am
Post subject: Re: Rollup 2 Error 3 & no Tuner found?? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I have three .nets installed in my computer, they are Microsoft.net Framework
1.0 Hotfix (KB887998) , Microsoft.net Framework 1.1 and Microsoft.net
Framework 1.1 Hotfix (KB886903). So do I have to uninstall these .nets before
I update my MCE to rollup 2 ? I have a Hp m7170n Media Center
"Alan B" wrote:
> Thanks for all your help. I am up and running, not so sure it was worth all
> the hasle but it does work. I have to reset all my series and a few other
> things but all seems well. When I remember back I did have an issue when one
> of the .net installs had a problem from the windows update. That must have
> beem mine and many others who are having problems with the upgrade.
>
> Definately worth removing all the .net stuff and then installing. The update
> gets all the lastest .net fixes and the roll up in one go.
>
> So again thanks for all you help and everyone else who made suggestions.
>
> Alan
>
> "mcedude-2005" wrote:
>
> > That's good to hear Alan B. Let us know how everything is working.
> > Perhaps it was a corrupt .net install.
> >
> > >> Stay informed about: Rollup 2 Error 3 & no Tuner found?? |
|
| Back to top |
|
| |
External
Since: Oct 14, 2005
Posts: 7
|
(Msg. 19) Posted: Sun Oct 16, 2005 9:24 am
Post subject: RE: Rollup 2 Error 3 & no Tuner found?? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Resolution: Mine is now working its so wierd. Delete from the Add/Remove
Control panel.
The FrameWorks 1.1
The Rollup 2
and the critical update
Essentualy your back to where you were....
Then AutoUpdate from MS and everything works!
"Alan B" wrote:
> I ran the rollup 2 and the update. I now have a problem with error code 3.
> when running the set up again MCE tells me that no tunner not installed or
> not working. I tried uninstalling back to rollup 1 but MCE will not start.
> With rollup 2 installed I can use most feature except live TV basically I get
> the error no tuner. It was fine this morning before the update, so I assume
> my tv tuner is there.
>
>
> Does anyone have any ideas as to what might have gone wrong. Also how do I
> install new tuner software. The device manager seems to think it is working
> fine.
>
> Alan >> Stay informed about: Rollup 2 Error 3 & no Tuner found?? |
|
| Back to top |
|
| |
External
Since: Oct 16, 2005
Posts: 2
|
(Msg. 20) Posted: Sun Oct 16, 2005 10:45 pm
Post subject: RE: Rollup 2 Error 3 & no Tuner found?? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Dopher,
Which critical update are you referring to when you suggest that it be
removed using A/RP?
"dopher" wrote:
> Resolution: Mine is now working its so wierd. Delete from the Add/Remove
> Control panel.
>
> The FrameWorks 1.1
> The Rollup 2
> and the critical update
>
> Essentualy your back to where you were....
>
> Then AutoUpdate from MS and everything works!
>
>
>
> "Alan B" wrote:
>
> > I ran the rollup 2 and the update. I now have a problem with error code 3.
> > when running the set up again MCE tells me that no tunner not installed or
> > not working. I tried uninstalling back to rollup 1 but MCE will not start.
> > With rollup 2 installed I can use most feature except live TV basically I get
> > the error no tuner. It was fine this morning before the update, so I assume
> > my tv tuner is there.
> >
> >
> > Does anyone have any ideas as to what might have gone wrong. Also how do I
> > install new tuner software. The device manager seems to think it is working
> > fine.
> >
> > Alan >> Stay informed about: Rollup 2 Error 3 & no Tuner found?? |
|
| Back to top |
|
| |
External
Since: Oct 16, 2005
Posts: 2
|
(Msg. 21) Posted: Sun Oct 16, 2005 10:47 pm
Post subject: RE: Rollup 2 Error 3 & no Tuner found?? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Sorry, I just found the KB article (900325) detailing that 886904 needs to be
uninstalled before doing Rollup #2.
"dancook" wrote:
> Dopher,
>
> Which critical update are you referring to when you suggest that it be
> removed using A/RP?
>
> "dopher" wrote:
>
> > Resolution: Mine is now working its so wierd. Delete from the Add/Remove
> > Control panel.
> >
> > The FrameWorks 1.1
> > The Rollup 2
> > and the critical update
> >
> > Essentualy your back to where you were....
> >
> > Then AutoUpdate from MS and everything works!
> >
> >
> >
> > "Alan B" wrote:
> >
> > > I ran the rollup 2 and the update. I now have a problem with error code 3.
> > > when running the set up again MCE tells me that no tunner not installed or
> > > not working. I tried uninstalling back to rollup 1 but MCE will not start.
> > > With rollup 2 installed I can use most feature except live TV basically I get
> > > the error no tuner. It was fine this morning before the update, so I assume
> > > my tv tuner is there.
> > >
> > >
> > > Does anyone have any ideas as to what might have gone wrong. Also how do I
> > > install new tuner software. The device manager seems to think it is working
> > > fine.
> > >
> > > Alan >> Stay informed about: Rollup 2 Error 3 & no Tuner found?? |
|
| Back to top |
|
| |
External
Since: Oct 19, 2005
Posts: 1
|
(Msg. 22) Posted: Wed Oct 19, 2005 11:51 pm
Post subject: RE: Rollup 2 Error 3 & no Tuner found?? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I have the same problem. Everything works except my recorded videos and live
tv. Does anybody have any suggestions?
"dopher" wrote:
> Yup. I have an HP Media Center with the x600 Pro and after the update it
> refuses to go to anything TV related. I have done everything to try to get
> this to work.
>
> The error I get is this:
>
> From the Media Setup Wizard when it gets to setup of TV Tuner:
>
> Critical Process Failure-
> A Critical Media Center Process has failed. If the problem persists, please
> restart your machine and try again, or contact Technical Support CODE: 3
>
> Then from the Media Center Setup under TV Setup you get this message:
>
> Tuner Not Found-
> The Tuner Hardware is either malfunctioning or not installed. Please ensure
> that both the tuner hardware and a valid tuner hardware driver are installed.
>
> All other features seem to work for the media center, videos, pictures and
> music are all working, I did not try DVD's however.
>
> This is a nightmare, Where do we go from here?
>
> "Alan B" wrote:
>
> > I ran the rollup 2 and the update. I now have a problem with error code 3.
> > when running the set up again MCE tells me that no tunner not installed or
> > not working. I tried uninstalling back to rollup 1 but MCE will not start.
> > With rollup 2 installed I can use most feature except live TV basically I get
> > the error no tuner. It was fine this morning before the update, so I assume
> > my tv tuner is there.
> >
> >
> > Does anyone have any ideas as to what might have gone wrong. Also how do I
> > install new tuner software. The device manager seems to think it is working
> > fine.
> >
> > Alan >> Stay informed about: Rollup 2 Error 3 & no Tuner found?? |
|
| Back to top |
|
| |
External
Since: Mar 18, 2006
Posts: 3
|
(Msg. 23) Posted: Fri Nov 16, 2007 12:31 pm
Post subject: RE: Rollup 2 Error 3 & no Tuner found?? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Nov 04, 2007
Posts: 2
|
(Msg. 24) Posted: Fri Nov 16, 2007 4:39 pm
Post subject: Re: Rollup 2 Error 3 & no Tuner found?? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"XRaySpeX" <XRaySpeX.DeleteThis@discussions.microsoft.com> wrote in message
news:7D577763-36DD-43AA-A4B5-862359E016A3@microsoft.com...
>
>
> "dopher" wrote:
>
>> Delete from the Add/Remove Control panel.
>>
>> The FrameWorks 1.1
>> The Rollup 2
>> and the critical update
>
> Exactly which Rollup Critical Patch are you referring to?
The one for NetFrameworks 1.1.
Netframeworks 1.1 has an update.
--
CSM1
http://www.carlmcmillan.com
-- >> Stay informed about: Rollup 2 Error 3 & no Tuner found?? |
|
| Back to top |
|
| |
External
Since: Feb 25, 2006
Posts: 374
|
(Msg. 25) Posted: Fri Nov 16, 2007 8:40 pm
Post subject: Re: Rollup 2 Error 3 & no Tuner found?? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
FAQ
Profile
Private Messages
Log in
