 |
|
|
|
Next: Boot Up
|
| Author |
Message |
External
Since: Feb 16, 2005
Posts: 1
|
(Msg. 1) Posted: Wed Jan 24, 2007 2:49 pm
Post subject: Vista Media Center Can't Find my tuner.
Archived from groups: microsoft>public>windows>mediacenter (more info?)
|
|
|
I am using a Hauppauge WinTV HVR 1600 and Vista's Media Center refuses to
see it.
When I attempt to "set up tv" from within Windows Media Center I get this
message:
"Tuner not found. The TV signal cannot be configured because no tuner
hardware was detected. Please ensure your hardware is correctly installed.
If you do not have tuner hardware you may purchase a tuner online from
Windows Marketplace."
Device Manager does show the card as installed and working properly.
when I exit Windows Media Center I have this message:
"Windows Media Center Receiver Service stopped working and was closed. To
help protect your computer, Date Execution Protection has closed Windows
Media Center Receiver Service."
I attempted to add WMCRS to the exceptions to DEP, but it is required.
Here is the info from the event log:
"Faulting application ehRecvr.exe, version 6.0.6000.16386, time stamp
0x4549b54f, faulting module unknown, version 0.0.0.0, time stamp 0x00000000,
exception code 0xc0000005, fault offset 0x00ae321f, process id 0x1660,
application start time 0x01c73ebb4b5fd1b4."
When I use the WinTV software it never appears to detect a signal but it
does not complain about no tuner being installed.
Any suggestions. Thanks in advance for any help?
~~~~~~~~~~~~~~~~~~~~~~~
John A. Wolf
jawlaw DeleteThis @hotmail.com
johnawolf.spaces.live.com
On Windows Live Messenger: jawlaw DeleteThis @hotmail.com |
|
| Back to top |
|
 | |
External
Since: Sep 11, 2005
Posts: 2120
|
(Msg. 2) Posted: Wed Jan 24, 2007 3:34 pm
Post subject: Re: Vista Media Center Can't Find my tuner. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
What release of Vista are you using?
Have you installed any MC compatigble MPEG2 Decoder package to use instead
of the one that is included in Vista?
"John A. Wolf" <jawlaw.TakeThisOut@hotmail.com> wrote in message
news:OWDRknAQHHA.4156@TK2MSFTNGP03.phx.gbl...
>I am using a Hauppauge WinTV HVR 1600 and Vista's Media Center refuses to
>see it.
>
> When I attempt to "set up tv" from within Windows Media Center I get this
> message:
>
> "Tuner not found. The TV signal cannot be configured because no tuner
> hardware was detected. Please ensure your hardware is correctly
> installed.
> If you do not have tuner hardware you may purchase a tuner online from
> Windows Marketplace."
>
> Device Manager does show the card as installed and working properly.
>
> when I exit Windows Media Center I have this message:
>
> "Windows Media Center Receiver Service stopped working and was closed. To
> help protect your computer, Date Execution Protection has closed Windows
> Media Center Receiver Service."
>
> I attempted to add WMCRS to the exceptions to DEP, but it is required.
>
> Here is the info from the event log:
>
> "Faulting application ehRecvr.exe, version 6.0.6000.16386, time stamp
> 0x4549b54f, faulting module unknown, version 0.0.0.0, time stamp
> 0x00000000,
> exception code 0xc0000005, fault offset 0x00ae321f, process id 0x1660,
> application start time 0x01c73ebb4b5fd1b4."
>
> When I use the WinTV software it never appears to detect a signal but it
> does not complain about no tuner being installed.
>
> Any suggestions. Thanks in advance for any help?
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~
> John A. Wolf
> jawlaw.TakeThisOut@hotmail.com
> johnawolf.spaces.live.com
> On Windows Live Messenger: jawlaw.TakeThisOut@hotmail.com
>
> |
|
| Back to top |
|
| |
External
Since: Feb 02, 2007
Posts: 1
|
(Msg. 3) Posted: Fri Feb 02, 2007 5:45 pm
Post subject: Re: Vista Media Center Can't Find my tuner. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Jan 24, 3:34 pm, "JW" <nos... DeleteThis @no.spam> wrote:
> What release of Vista are you using?
> Have you installed any MC compatigble MPEG2 Decoder package to use instead
> of the one that is included in Vista?
>
> "John A. Wolf" <jaw... DeleteThis @hotmail.com> wrote in messagenews:OWDRknAQHHA.4156@TK2MSFTNGP03.phx.gbl...
>
>
>
> >I am using a Hauppauge WinTV HVR 1600 and Vista's Media Center refuses to
> >see it.
>
> > When I attempt to "set up tv" from within Windows Media Center I get this
> > message:
>
> > "Tuner not found. The TV signal cannot be configured because no tuner
> > hardware was detected. Please ensure your hardware is correctly
> > installed.
> > If you do not have tuner hardware you may purchase a tuner online from
> > Windows Marketplace."
>
> > Device Manager does show the card as installed and working properly.
>
> > when I exit Windows Media Center I have this message:
>
> > "Windows Media Center Receiver Service stopped working and was closed. To
> > help protect your computer, Date Execution Protection has closed Windows
> > Media Center Receiver Service."
>
> > I attempted to add WMCRS to the exceptions to DEP, but it is required.
>
> > Here is the info from the event log:
>
> > "Faulting application ehRecvr.exe, version 6.0.6000.16386, time stamp
> > 0x4549b54f, faulting module unknown, version 0.0.0.0, time stamp
> > 0x00000000,
> > exception code 0xc0000005, fault offset 0x00ae321f, process id 0x1660,
> > application start time 0x01c73ebb4b5fd1b4."
>
> > When I use the WinTV software it never appears to detect a signal but it
> > does not complain about no tuner being installed.
>
> > Any suggestions. Thanks in advance for any help?
>
> > ~~~~~~~~~~~~~~~~~~~~~~~
> > John A. Wolf
> > jaw... DeleteThis @hotmail.com
> > johnawolf.spaces.live.com
> > On Windows Live Messenger: jaw... DeleteThis @hotmail.com- Hide quoted text -
>
> - Show quoted text -
I have this exact same issue. The ehrecvr.exe process keeps crashing
every single time I launch Media Center and attempt to "Set Up Tv".
I'm running Windows Vista Ultimate on a Dell XPS Gen5 with a Pinnacle
PCTV 110i Capture Card. I've also tried with a Angel Dual TV Tuner
with the exact same crash. Is there a hotfix for this crash? It is
one thing to update drivers, but when it crashes the same with
multiple tuner cards it doesn't look to be a tuner driver issue.
My Vista install is an upgrade. Could there be an issue with
something that was installed under Windows XP MCE 2005? I remember
back when MCE 2005 Rollup 2 when out people had similiar issues and it
had something to do with .Net Framworks.
Any help would be most appreciated. >> Stay informed about: Vista Media Center Can't Find my tuner. |
|
| Back to top |
|
| |
External
Since: Sep 11, 2005
Posts: 2120
|
(Msg. 4) Posted: Fri Feb 02, 2007 9:43 pm
Post subject: Re: Vista Media Center Can't Find my tuner. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
What Media Center compatible MPEG2 decoder software do you have intstaled
and set to as the Preferred decoder to use? You can check using the MS
utility from the following link:
http://www.microsoft.com/downloads/details.aspx?FamilyID=DE1491AC-0AB6...90-943D
<iworkl8.RemoveThis@gmail.com> wrote in message
news:1170467132.960242.158680@s48g2000cws.googlegroups.com...
> On Jan 24, 3:34 pm, "JW" <nos....RemoveThis@no.spam> wrote:
>> What release of Vista are you using?
>> Have you installed any MC compatigble MPEG2 Decoder package to use
>> instead
>> of the one that is included in Vista?
>>
>> "John A. Wolf" <jaw....RemoveThis@hotmail.com> wrote in
>> messagenews:OWDRknAQHHA.4156@TK2MSFTNGP03.phx.gbl...
>>
>>
>>
>> >I am using a Hauppauge WinTV HVR 1600 and Vista's Media Center refuses
>> >to
>> >see it.
>>
>> > When I attempt to "set up tv" from within Windows Media Center I get
>> > this
>> > message:
>>
>> > "Tuner not found. The TV signal cannot be configured because no tuner
>> > hardware was detected. Please ensure your hardware is correctly
>> > installed.
>> > If you do not have tuner hardware you may purchase a tuner online from
>> > Windows Marketplace."
>>
>> > Device Manager does show the card as installed and working properly.
>>
>> > when I exit Windows Media Center I have this message:
>>
>> > "Windows Media Center Receiver Service stopped working and was closed.
>> > To
>> > help protect your computer, Date Execution Protection has closed
>> > Windows
>> > Media Center Receiver Service."
>>
>> > I attempted to add WMCRS to the exceptions to DEP, but it is required.
>>
>> > Here is the info from the event log:
>>
>> > "Faulting application ehRecvr.exe, version 6.0.6000.16386, time stamp
>> > 0x4549b54f, faulting module unknown, version 0.0.0.0, time stamp
>> > 0x00000000,
>> > exception code 0xc0000005, fault offset 0x00ae321f, process id 0x1660,
>> > application start time 0x01c73ebb4b5fd1b4."
>>
>> > When I use the WinTV software it never appears to detect a signal but
>> > it
>> > does not complain about no tuner being installed.
>>
>> > Any suggestions. Thanks in advance for any help?
>>
>> > ~~~~~~~~~~~~~~~~~~~~~~~
>> > John A. Wolf
>> > jaw....RemoveThis@hotmail.com
>> > johnawolf.spaces.live.com
>> > On Windows Live Messenger: jaw....RemoveThis@hotmail.com- Hide quoted text -
>>
>> - Show quoted text -
>
> I have this exact same issue. The ehrecvr.exe process keeps crashing
> every single time I launch Media Center and attempt to "Set Up Tv".
> I'm running Windows Vista Ultimate on a Dell XPS Gen5 with a Pinnacle
> PCTV 110i Capture Card. I've also tried with a Angel Dual TV Tuner
> with the exact same crash. Is there a hotfix for this crash? It is
> one thing to update drivers, but when it crashes the same with
> multiple tuner cards it doesn't look to be a tuner driver issue.
>
> My Vista install is an upgrade. Could there be an issue with
> something that was installed under Windows XP MCE 2005? I remember
> back when MCE 2005 Rollup 2 when out people had similiar issues and it
> had something to do with .Net Framworks.
>
> Any help would be most appreciated.
> >> Stay informed about: Vista Media Center Can't Find my tuner. |
|
| Back to top |
|
| |
External
Since: Mar 13, 2007
Posts: 1
|
(Msg. 5) Posted: Tue Mar 13, 2007 4:44 am
Post subject: Re: Vista Media Center Can't Find my tuner. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I experienced the same problem and found out that after re-installing the
Vista Codec Package, Media Center worked again. So apparently in my case it
was indeed an incompatible decoder package.
"JW" wrote:
> What release of Vista are you using?
> Have you installed any MC compatigble MPEG2 Decoder package to use instead
> of the one that is included in Vista?
>
> "John A. Wolf" <jawlaw.RemoveThis@hotmail.com> wrote in message
> news:OWDRknAQHHA.4156@TK2MSFTNGP03.phx.gbl...
> >I am using a Hauppauge WinTV HVR 1600 and Vista's Media Center refuses to
> >see it.
> >
> > When I attempt to "set up tv" from within Windows Media Center I get this
> > message:
> >
> > "Tuner not found. The TV signal cannot be configured because no tuner
> > hardware was detected. Please ensure your hardware is correctly
> > installed.
> > If you do not have tuner hardware you may purchase a tuner online from
> > Windows Marketplace."
> >
> > Device Manager does show the card as installed and working properly.
> >
> > when I exit Windows Media Center I have this message:
> >
> > "Windows Media Center Receiver Service stopped working and was closed. To
> > help protect your computer, Date Execution Protection has closed Windows
> > Media Center Receiver Service."
> >
> > I attempted to add WMCRS to the exceptions to DEP, but it is required.
> >
> > Here is the info from the event log:
> >
> > "Faulting application ehRecvr.exe, version 6.0.6000.16386, time stamp
> > 0x4549b54f, faulting module unknown, version 0.0.0.0, time stamp
> > 0x00000000,
> > exception code 0xc0000005, fault offset 0x00ae321f, process id 0x1660,
> > application start time 0x01c73ebb4b5fd1b4."
> >
> > When I use the WinTV software it never appears to detect a signal but it
> > does not complain about no tuner being installed.
> >
> > Any suggestions. Thanks in advance for any help?
> >
> >
> > ~~~~~~~~~~~~~~~~~~~~~~~
> > John A. Wolf
> > jawlaw.RemoveThis@hotmail.com
> > johnawolf.spaces.live.com
> > On Windows Live Messenger: jawlaw.RemoveThis@hotmail.com
> >
> >
>
>
> >> Stay informed about: Vista Media Center Can't Find my tuner. |
|
| Back to top |
|
| |
External
Since: Sep 19, 2006
Posts: 1
|
(Msg. 6) Posted: Mon Jul 30, 2007 3:20 pm
Post subject: Re: Vista Media Center Can't Find my tuner. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Hi TVtester - I'm having the same problem - where do I get the Visa Codec
Package from? Do you have a link at MS?
"TVtester" wrote:
> I experienced the same problem and found out that after re-installing the
> Vista Codec Package, Media Center worked again. So apparently in my case it
> was indeed an incompatible decoder package.
>
> "JW" wrote:
>
> > What release of Vista are you using?
> > Have you installed any MC compatigble MPEG2 Decoder package to use instead
> > of the one that is included in Vista?
> >
> > "John A. Wolf" <jawlaw RemoveThis @hotmail.com> wrote in message
> > news:OWDRknAQHHA.4156@TK2MSFTNGP03.phx.gbl...
> > >I am using a Hauppauge WinTV HVR 1600 and Vista's Media Center refuses to
> > >see it.
> > >
> > > When I attempt to "set up tv" from within Windows Media Center I get this
> > > message:
> > >
> > > "Tuner not found. The TV signal cannot be configured because no tuner
> > > hardware was detected. Please ensure your hardware is correctly
> > > installed.
> > > If you do not have tuner hardware you may purchase a tuner online from
> > > Windows Marketplace."
> > >
> > > Device Manager does show the card as installed and working properly.
> > >
> > > when I exit Windows Media Center I have this message:
> > >
> > > "Windows Media Center Receiver Service stopped working and was closed. To
> > > help protect your computer, Date Execution Protection has closed Windows
> > > Media Center Receiver Service."
> > >
> > > I attempted to add WMCRS to the exceptions to DEP, but it is required.
> > >
> > > Here is the info from the event log:
> > >
> > > "Faulting application ehRecvr.exe, version 6.0.6000.16386, time stamp
> > > 0x4549b54f, faulting module unknown, version 0.0.0.0, time stamp
> > > 0x00000000,
> > > exception code 0xc0000005, fault offset 0x00ae321f, process id 0x1660,
> > > application start time 0x01c73ebb4b5fd1b4."
> > >
> > > When I use the WinTV software it never appears to detect a signal but it
> > > does not complain about no tuner being installed.
> > >
> > > Any suggestions. Thanks in advance for any help?
> > >
> > >
> > > ~~~~~~~~~~~~~~~~~~~~~~~
> > > John A. Wolf
> > > jawlaw RemoveThis @hotmail.com
> > > johnawolf.spaces.live.com
> > > On Windows Live Messenger: jawlaw RemoveThis @hotmail.com
> > >
> > >
> >
> >
> > >> Stay informed about: Vista Media Center Can't Find my tuner. |
|
| Back to top |
|
| |
| Related Topics: | Vista Media Center and Winfast PVR2000 TV Tuner - I downloaded the latest Leadtek Vista drivers for the PVR2000 card. Live TV works fine using the Winfast program in Vista. If I load Media Center, it tells me I don't have a TV tuner installed. I have tried going thru the settings and TV setup, but..
Media Center not reading TV Tuner? - I just bought an Avermedia Hybrid+FM Cardbus for my Acer Aspire 5110. It works quite well with the standard software, but i'd prefer to run it through MCE so I can link it upto the TV if I need to later. However, everytime I try to run it through MCE...
media center cant find videos - christmas day was the last time all my videos were in media center. the next day, none of them were there. only two empty folders that were in my videos. the videos are in the my videos folder but they dont show up in media center. m y pictures and..
Dual TV Tuner in Windows Media Center - I purchased a Dell computer last week and it came with a dual tv tuner and of course Windows Media Center Edition. We have configured it to be able to record one show and watch another, as it seems like it's supposed to do. I also have a brand new..
Media Center Remote control and TV Tuner - I recently got a new Media Center PC from Evesham Technology with a TV tuner built in and a remote control. When I first set up media center, the remote worked fine until one day it just stop talking to my computer. When I press a button, the remote.. |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
Windows XP