 |
|
|
|
Next: Do flatscreens have flicker problems at low refre..
|
| Author |
Message |
External
Since: Nov 15, 2005
Posts: 7
|
(Msg. 1) Posted: Fri May 23, 2008 8:45 pm
Post subject: RDP won't connect, no error msg
Archived from groups: microsoft>public>windowsxp>work_remotely (more info?)
|
|
|
Suddenly RDP won't connect. I'm running two machines on WinXP SP3 32-bit,
and suddenly, yesterday, RDP won't connect.
I don't get any error message, RDP just blinks "Connecting to
xxx.xxx.xxx.xxx" and then dissapears without any error message. I've tried
three different computers (all running WinXP SP3), and none of them
connecting to this one specific host. These clients can connect to each
other via RDP without any problem.
I've checked the event log on the problematic server, but there is no clue
as to what can be the problem. I've also tried to reboot this server, but
there is no improvment.
Regards
Trond Svendsen |
|
| Back to top |
|
 | |
External
Since: May 23, 2008
Posts: 5
|
(Msg. 2) Posted: Fri May 23, 2008 10:22 pm
Post subject: Re: RDP won't connect, no error msg [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
It could be MTU issue. This search result may help.
connection to remote computer was broken caused by network error
If the Remote Desktop screen comes up black and then you receive this
error, you may need test and modify the MTU. These links may help, ...
www.chicagotech.net/Q&A/vpn54.htm
--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Trond Svendsen" <trond DeleteThis @blackboxas.no> wrote in message
news:eQGIvUQvIHA.3484@TK2MSFTNGP06.phx.gbl...
> Suddenly RDP won't connect. I'm running two machines on WinXP SP3 32-bit,
> and suddenly, yesterday, RDP won't connect.
>
> I don't get any error message, RDP just blinks "Connecting to
> xxx.xxx.xxx.xxx" and then dissapears without any error message. I've tried
> three different computers (all running WinXP SP3), and none of them
> connecting to this one specific host. These clients can connect to each
> other via RDP without any problem.
>
> I've checked the event log on the problematic server, but there is no clue
> as to what can be the problem. I've also tried to reboot this server, but
> there is no improvment.
>
>
> Regards
> Trond Svendsen
> |
|
| Back to top |
|
| |
External
Since: Nov 15, 2005
Posts: 7
|
(Msg. 3) Posted: Sat May 24, 2008 7:17 am
Post subject: Re: RDP won't connect, no error msg [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Afraid not, it has been working flawlessy for weeks, and without any apparnt
changes/updates, it stopped working at all. I don't get any error messages,
the client just blinks "Connecting to xxx.xxx.xxx.xxx" and then dissapears
without any error message.
"Robert L. (MS-MVP)" <findemail RemoveThis @chicagotech.net> wrote in message
news:usGzz1UvIHA.5520@TK2MSFTNGP06.phx.gbl...
> It could be MTU issue. This search result may help.
> connection to remote computer was broken caused by network error
> If the Remote Desktop screen comes up black and then you receive this
> error, you may need test and modify the MTU. These links may help, ...
> www.chicagotech.net/Q&A/vpn54.htm
>
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
> "Trond Svendsen" <trond RemoveThis @blackboxas.no> wrote in message
> news:eQGIvUQvIHA.3484@TK2MSFTNGP06.phx.gbl...
>> Suddenly RDP won't connect. I'm running two machines on WinXP SP3 32-bit,
>> and suddenly, yesterday, RDP won't connect.
>>
>> I don't get any error message, RDP just blinks "Connecting to
>> xxx.xxx.xxx.xxx" and then dissapears without any error message. I've
>> tried three different computers (all running WinXP SP3), and none of them
>> connecting to this one specific host. These clients can connect to each
>> other via RDP without any problem.
>>
>> I've checked the event log on the problematic server, but there is no
>> clue as to what can be the problem. I've also tried to reboot this
>> server, but there is no improvment.
>>
>>
>> Regards
>> Trond Svendsen
>>
> >> Stay informed about: RDP won't connect, no error msg |
|
| Back to top |
|
| |
External
Since: May 29, 2008
Posts: 2
|
(Msg. 4) Posted: Thu May 29, 2008 7:41 am
Post subject: Re: RDP won't connect, no error msg [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I'm having the exact same issue. I don't think it happened right after
installing SP3 for XP so that shouldn't be the issue. And, frankly, VNC
sucks so I want my RDC back x.x Anyone have any other ideas?
"Trond Svendsen" wrote:
> Afraid not, it has been working flawlessy for weeks, and without any apparnt
> changes/updates, it stopped working at all. I don't get any error messages,
> the client just blinks "Connecting to xxx.xxx.xxx.xxx" and then dissapears
> without any error message.
>
>
>
>
> "Robert L. (MS-MVP)" <findemail.RemoveThis@chicagotech.net> wrote in message
> news:usGzz1UvIHA.5520@TK2MSFTNGP06.phx.gbl...
> > It could be MTU issue. This search result may help.
> > connection to remote computer was broken caused by network error
> > If the Remote Desktop screen comes up black and then you receive this
> > error, you may need test and modify the MTU. These links may help, ...
> > www.chicagotech.net/Q&A/vpn54.htm
> >
> >
> > --
> > Bob Lin, MS-MVP, MCSE & CNE
> > Networking, Internet, Routing, VPN Troubleshooting on
> > http://www.ChicagoTech.net
> > How to Setup Windows, Network, VPN & Remote Access on
> > http://www.HowToNetworking.com
> > "Trond Svendsen" <trond.RemoveThis@blackboxas.no> wrote in message
> > news:eQGIvUQvIHA.3484@TK2MSFTNGP06.phx.gbl...
> >> Suddenly RDP won't connect. I'm running two machines on WinXP SP3 32-bit,
> >> and suddenly, yesterday, RDP won't connect.
> >>
> >> I don't get any error message, RDP just blinks "Connecting to
> >> xxx.xxx.xxx.xxx" and then dissapears without any error message. I've
> >> tried three different computers (all running WinXP SP3), and none of them
> >> connecting to this one specific host. These clients can connect to each
> >> other via RDP without any problem.
> >>
> >> I've checked the event log on the problematic server, but there is no
> >> clue as to what can be the problem. I've also tried to reboot this
> >> server, but there is no improvment.
> >>
> >>
> >> Regards
> >> Trond Svendsen
> >>
> >
>
>
> >> Stay informed about: RDP won't connect, no error msg |
|
| Back to top |
|
| |
External
Since: May 29, 2008
Posts: 2
|
(Msg. 5) Posted: Thu May 29, 2008 8:05 am
Post subject: Re: RDP won't connect, no error msg [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Aha! I think this is my problem - might be the same for you:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=...rosoft.
"Trond Svendsen" wrote:
> Afraid not, it has been working flawlessy for weeks, and without any apparnt
> changes/updates, it stopped working at all. I don't get any error messages,
> the client just blinks "Connecting to xxx.xxx.xxx.xxx" and then dissapears
> without any error message.
>
>
>
>
> "Robert L. (MS-MVP)" <findemail DeleteThis @chicagotech.net> wrote in message
> news:usGzz1UvIHA.5520@TK2MSFTNGP06.phx.gbl...
> > It could be MTU issue. This search result may help.
> > connection to remote computer was broken caused by network error
> > If the Remote Desktop screen comes up black and then you receive this
> > error, you may need test and modify the MTU. These links may help, ...
> > www.chicagotech.net/Q&A/vpn54.htm
> >
> >
> > --
> > Bob Lin, MS-MVP, MCSE & CNE
> > Networking, Internet, Routing, VPN Troubleshooting on
> > http://www.ChicagoTech.net
> > How to Setup Windows, Network, VPN & Remote Access on
> > http://www.HowToNetworking.com
> > "Trond Svendsen" <trond DeleteThis @blackboxas.no> wrote in message
> > news:eQGIvUQvIHA.3484@TK2MSFTNGP06.phx.gbl...
> >> Suddenly RDP won't connect. I'm running two machines on WinXP SP3 32-bit,
> >> and suddenly, yesterday, RDP won't connect.
> >>
> >> I don't get any error message, RDP just blinks "Connecting to
> >> xxx.xxx.xxx.xxx" and then dissapears without any error message. I've
> >> tried three different computers (all running WinXP SP3), and none of them
> >> connecting to this one specific host. These clients can connect to each
> >> other via RDP without any problem.
> >>
> >> I've checked the event log on the problematic server, but there is no
> >> clue as to what can be the problem. I've also tried to reboot this
> >> server, but there is no improvment.
> >>
> >>
> >> Regards
> >> Trond Svendsen
> >>
> >
>
>
> >> Stay informed about: RDP won't connect, no error msg |
|
| Back to top |
|
| |
External
Since: May 23, 2008
Posts: 5
|
(Msg. 6) Posted: Thu May 29, 2008 3:12 pm
Post subject: Re: RDP won't connect, no error msg [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thank you for the tip.
--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Chase Flynn" <Chase Flynn DeleteThis @discussions.microsoft.com> wrote in message
news:ACA1D31A-9F40-401A-8B41-E9F09C255EDD@microsoft.com...
> Aha! I think this is my problem - might be the same for you:
> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=...rosoft.
>
> "Trond Svendsen" wrote:
>
>> Afraid not, it has been working flawlessy for weeks, and without any
>> apparnt
>> changes/updates, it stopped working at all. I don't get any error
>> messages,
>> the client just blinks "Connecting to xxx.xxx.xxx.xxx" and then
>> dissapears
>> without any error message.
>>
>>
>>
>>
>> "Robert L. (MS-MVP)" <findemail DeleteThis @chicagotech.net> wrote in message
>> news:usGzz1UvIHA.5520@TK2MSFTNGP06.phx.gbl...
>> > It could be MTU issue. This search result may help.
>> > connection to remote computer was broken caused by network error
>> > If the Remote Desktop screen comes up black and then you receive
>> > this
>> > error, you may need test and modify the MTU. These links may help, ...
>> > www.chicagotech.net/Q&A/vpn54.htm
>> >
>> >
>> > --
>> > Bob Lin, MS-MVP, MCSE & CNE
>> > Networking, Internet, Routing, VPN Troubleshooting on
>> > http://www.ChicagoTech.net
>> > How to Setup Windows, Network, VPN & Remote Access on
>> > http://www.HowToNetworking.com
>> > "Trond Svendsen" <trond DeleteThis @blackboxas.no> wrote in message
>> > news:eQGIvUQvIHA.3484@TK2MSFTNGP06.phx.gbl...
>> >> Suddenly RDP won't connect. I'm running two machines on WinXP SP3
>> >> 32-bit,
>> >> and suddenly, yesterday, RDP won't connect.
>> >>
>> >> I don't get any error message, RDP just blinks "Connecting to
>> >> xxx.xxx.xxx.xxx" and then dissapears without any error message. I've
>> >> tried three different computers (all running WinXP SP3), and none of
>> >> them
>> >> connecting to this one specific host. These clients can connect to
>> >> each
>> >> other via RDP without any problem.
>> >>
>> >> I've checked the event log on the problematic server, but there is no
>> >> clue as to what can be the problem. I've also tried to reboot this
>> >> server, but there is no improvment.
>> >>
>> >>
>> >> Regards
>> >> Trond Svendsen
>> >>
>> >
>>
>>
>> >> Stay informed about: RDP won't connect, no error msg |
|
| Back to top |
|
| |
External
Since: Jul 11, 2007
Posts: 8
|
(Msg. 7) Posted: Fri Jul 25, 2008 9:33 pm
Post subject: Re: RDP won't connect, no error msg [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I want to vomit. I've been having the same problem for weeks and had no
idea what the problem was. I've been chasing rabbits all this time,
thinking it was SP3, my router, some software on my system (other than
the damned video drivers), or the alignment of the planets.
Makes me feel like killing someone.
But not you--to YOU I am grateful.
Chase Flynn wrote:
> Aha! I think this is my problem - might be the same for you:
> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=...rosoft.
>
> "Trond Svendsen" wrote:
>
>> Afraid not, it has been working flawlessy for weeks, and without any
>> apparnt changes/updates, it stopped working at all. I don't get any
>> error messages, the client just blinks "Connecting to
>> xxx.xxx.xxx.xxx" and then dissapears without any error message.
>>
>>
>>
>>
>> "Robert L. (MS-MVP)" <findemail.TakeThisOut@chicagotech.net> wrote in message
>> news:usGzz1UvIHA.5520@TK2MSFTNGP06.phx.gbl...
>>> It could be MTU issue. This search result may help.
>>> connection to remote computer was broken caused by network error
>>> If the Remote Desktop screen comes up black and then you
>>> receive this error, you may need test and modify the MTU. These
>>> links may help, ... www.chicagotech.net/Q&A/vpn54.htm
>>>
>>>
>>> --
>>> Bob Lin, MS-MVP, MCSE & CNE
>>> Networking, Internet, Routing, VPN Troubleshooting on
>>> http://www.ChicagoTech.net
>>> How to Setup Windows, Network, VPN & Remote Access on
>>> http://www.HowToNetworking.com
>>> "Trond Svendsen" <trond.TakeThisOut@blackboxas.no> wrote in message
>>> news:eQGIvUQvIHA.3484@TK2MSFTNGP06.phx.gbl...
>>>> Suddenly RDP won't connect. I'm running two machines on WinXP SP3
>>>> 32-bit, and suddenly, yesterday, RDP won't connect.
>>>>
>>>> I don't get any error message, RDP just blinks "Connecting to
>>>> xxx.xxx.xxx.xxx" and then dissapears without any error message.
>>>> I've tried three different computers (all running WinXP SP3), and
>>>> none of them connecting to this one specific host. These clients
>>>> can connect to each other via RDP without any problem.
>>>>
>>>> I've checked the event log on the problematic server, but there is
>>>> no clue as to what can be the problem. I've also tried to reboot
>>>> this server, but there is no improvment.
>>>>
>>>>
>>>> Regards
>>>> Trond Svendsen >> Stay informed about: RDP won't connect, no error msg |
|
| Back to top |
|
| |
External
Since: Aug 18, 2008
Posts: 1
|
(Msg. 8) Posted: Mon Aug 18, 2008 9:42 am
Post subject: Dell [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Dell toutes nos meilleurs offres
Dell all our best deals
Dell alle unsere Top-Angebote
Dell todas nuestras mejores ofertas
Dell alle vores bedste tilbud
Dell kaikki parhaamme käsitellään
Dell tutte le nostre migliori offerte
???????????
???????????
?? ?? ??? ??
Dell ??? ?? ???? ?? ???? ???????
http://www1.euro.dell.com/content/default.aspx?c=fr&l=en&s=dhs&dgc=AF&...=5676&l
"·" <noreply DeleteThis @all.com> a écrit dans le message de
news:eov9U%23r7IHA.3736@TK2MSFTNGP06.phx.gbl...
>I want to vomit. I've been having the same problem for weeks and had no
>idea what the problem was. I've been chasing rabbits all this time,
>thinking it was SP3, my router, some software on my system (other than the
>damned video drivers), or the alignment of the planets.
>
> Makes me feel like killing someone.
>
> But not you--to YOU I am grateful.
>
> Chase Flynn wrote:
>
>> Aha! I think this is my problem - might be the same for you:
>> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=...rosoft.
>>
>> "Trond Svendsen" wrote:
>>
>>> Afraid not, it has been working flawlessy for weeks, and without any
>>> apparnt changes/updates, it stopped working at all. I don't get any
>>> error messages, the client just blinks "Connecting to
>>> xxx.xxx.xxx.xxx" and then dissapears without any error message.
>>>
>>>
>>>
>>>
>>> "Robert L. (MS-MVP)" <findemail DeleteThis @chicagotech.net> wrote in message
>>> news:usGzz1UvIHA.5520@TK2MSFTNGP06.phx.gbl...
>>>> It could be MTU issue. This search result may help.
>>>> connection to remote computer was broken caused by network error
>>>> If the Remote Desktop screen comes up black and then you
>>>> receive this error, you may need test and modify the MTU. These
>>>> links may help, ... www.chicagotech.net/Q&A/vpn54.htm
>>>>
>>>>
>>>> --
>>>> Bob Lin, MS-MVP, MCSE & CNE
>>>> Networking, Internet, Routing, VPN Troubleshooting on
>>>> http://www.ChicagoTech.net
>>>> How to Setup Windows, Network, VPN & Remote Access on
>>>> http://www.HowToNetworking.com
>>>> "Trond Svendsen" <trond DeleteThis @blackboxas.no> wrote in message
>>>> news:eQGIvUQvIHA.3484@TK2MSFTNGP06.phx.gbl...
>>>>> Suddenly RDP won't connect. I'm running two machines on WinXP SP3
>>>>> 32-bit, and suddenly, yesterday, RDP won't connect.
>>>>>
>>>>> I don't get any error message, RDP just blinks "Connecting to
>>>>> xxx.xxx.xxx.xxx" and then dissapears without any error message.
>>>>> I've tried three different computers (all running WinXP SP3), and
>>>>> none of them connecting to this one specific host. These clients
>>>>> can connect to each other via RDP without any problem.
>>>>>
>>>>> I've checked the event log on the problematic server, but there is
>>>>> no clue as to what can be the problem. I've also tried to reboot
>>>>> this server, but there is no improvment.
>>>>>
>>>>>
>>>>> Regards
>>>>> Trond Svendsen
>
>
> >> Stay informed about: RDP won't connect, no error msg |
|
| Back to top |
|
| |
External
Since: Oct 10, 2008
Posts: 1
|
(Msg. 9) Posted: Fri Oct 10, 2008 11:29 am
Post subject: Re: RDP won't connect, no error msg [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I'm having this same problem, but that link is now dead. can you or someone
else provide an updated link?
"Chase Flynn" wrote:
> Aha! I think this is my problem - might be the same for you:
> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=...rosoft.
>
> "Trond Svendsen" wrote:
>
> > Afraid not, it has been working flawlessy for weeks, and without any apparnt
> > changes/updates, it stopped working at all. I don't get any error messages,
> > the client just blinks "Connecting to xxx.xxx.xxx.xxx" and then dissapears
> > without any error message.
> >
> >
> >
> >
> > "Robert L. (MS-MVP)" <findemail DeleteThis @chicagotech.net> wrote in message
> > news:usGzz1UvIHA.5520@TK2MSFTNGP06.phx.gbl...
> > > It could be MTU issue. This search result may help.
> > > connection to remote computer was broken caused by network error
> > > If the Remote Desktop screen comes up black and then you receive this
> > > error, you may need test and modify the MTU. These links may help, ...
> > > www.chicagotech.net/Q&A/vpn54.htm
> > >
> > >
> > > --
> > > Bob Lin, MS-MVP, MCSE & CNE
> > > Networking, Internet, Routing, VPN Troubleshooting on
> > > http://www.ChicagoTech.net
> > > How to Setup Windows, Network, VPN & Remote Access on
> > > http://www.HowToNetworking.com
> > > "Trond Svendsen" <trond DeleteThis @blackboxas.no> wrote in message
> > > news:eQGIvUQvIHA.3484@TK2MSFTNGP06.phx.gbl...
> > >> Suddenly RDP won't connect. I'm running two machines on WinXP SP3 32-bit,
> > >> and suddenly, yesterday, RDP won't connect.
> > >>
> > >> I don't get any error message, RDP just blinks "Connecting to
> > >> xxx.xxx.xxx.xxx" and then dissapears without any error message. I've
> > >> tried three different computers (all running WinXP SP3), and none of them
> > >> connecting to this one specific host. These clients can connect to each
> > >> other via RDP without any problem.
> > >>
> > >> I've checked the event log on the problematic server, but there is no
> > >> clue as to what can be the problem. I've also tried to reboot this
> > >> server, but there is no improvment.
> > >>
> > >>
> > >> Regards
> > >> Trond Svendsen
> > >>
> > >
> >
> >
> > >> Stay informed about: RDP won't connect, no error msg |
|
| Back to top |
|
| |
External
Since: Mar 15, 2006
Posts: 176
|
(Msg. 10) Posted: Tue Oct 21, 2008 2:36 pm
Post subject: Re: RDP won't connect, no error msg [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I am also having the same problem. Could someone please update the link or
simply copy and paste what WAS in that link into this forum?
"ANdrew" wrote:
> I'm having this same problem, but that link is now dead. can you or someone
> else provide an updated link?
>
> "Chase Flynn" wrote:
>
> > Aha! I think this is my problem - might be the same for you:
> > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=...rosoft.
> >
> > "Trond Svendsen" wrote:
> >
> > > Afraid not, it has been working flawlessy for weeks, and without any apparnt
> > > changes/updates, it stopped working at all. I don't get any error messages,
> > > the client just blinks "Connecting to xxx.xxx.xxx.xxx" and then dissapears
> > > without any error message.
> > >
> > >
> > >
> > >
> > > "Robert L. (MS-MVP)" <findemail DeleteThis @chicagotech.net> wrote in message
> > > news:usGzz1UvIHA.5520@TK2MSFTNGP06.phx.gbl...
> > > > It could be MTU issue. This search result may help.
> > > > connection to remote computer was broken caused by network error
> > > > If the Remote Desktop screen comes up black and then you receive this
> > > > error, you may need test and modify the MTU. These links may help, ...
> > > > www.chicagotech.net/Q&A/vpn54.htm
> > > >
> > > >
> > > > --
> > > > Bob Lin, MS-MVP, MCSE & CNE
> > > > Networking, Internet, Routing, VPN Troubleshooting on
> > > > http://www.ChicagoTech.net
> > > > How to Setup Windows, Network, VPN & Remote Access on
> > > > http://www.HowToNetworking.com
> > > > "Trond Svendsen" <trond DeleteThis @blackboxas.no> wrote in message
> > > > news:eQGIvUQvIHA.3484@TK2MSFTNGP06.phx.gbl...
> > > >> Suddenly RDP won't connect. I'm running two machines on WinXP SP3 32-bit,
> > > >> and suddenly, yesterday, RDP won't connect.
> > > >>
> > > >> I don't get any error message, RDP just blinks "Connecting to
> > > >> xxx.xxx.xxx.xxx" and then dissapears without any error message. I've
> > > >> tried three different computers (all running WinXP SP3), and none of them
> > > >> connecting to this one specific host. These clients can connect to each
> > > >> other via RDP without any problem.
> > > >>
> > > >> I've checked the event log on the problematic server, but there is no
> > > >> clue as to what can be the problem. I've also tried to reboot this
> > > >> server, but there is no improvment.
> > > >>
> > > >>
> > > >> Regards
> > > >> Trond Svendsen
> > > >>
> > > >
> > >
> > >
> > > >> Stay informed about: RDP won't connect, no error msg |
|
| Back to top |
|
| |
External
Since: Aug 13, 2004
Posts: 128
|
(Msg. 11) Posted: Mon Dec 22, 2008 8:47 am
Post subject: Re: RDP won't connect, no error msg [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
The last three threads that solved this problem all have dead links to the
solution! Apparently there is one but we need the solution posted in this
thread not a link. PLEASE!
Thanks
"Steve" wrote:
> I am also having the same problem. Could someone please update the link or
> simply copy and paste what WAS in that link into this forum?
> >> Stay informed about: RDP won't connect, no error msg |
|
| Back to top |
|
| |
External
Since: Dec 22, 2008
Posts: 1
|
(Msg. 12) Posted: Mon Dec 22, 2008 5:43 pm
Post subject: Re: RDP won't connect, no error msg [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I found some posts on the Community forums that indicated MSKB#957097 may
cause this problem, however this was not the case for me.
I did discover that it was caused by nVidia Forceware drivers 178.24 which
is especially irritating considering they were WHQL approved.
I uninstalled and loaded the latest 180.48 instead and the problem is
resolved. >> Stay informed about: RDP won't connect, no error msg |
|
| Back to top |
|
| |
| Related Topics: | Can't connect to VPN (error 721) - Hi folks, I'm using XP Media Center, SP2 on a new laptop, from behind a Belkin N1 Wireless 180170 router, and I can't connect to the VPN at work. It gets to the Verifying username / password stage, then times out with error 721. To minimise..
Getting Error: "The client could not connect to the remote.. - Hello, I've Windows Vista at my Office, and 2 Computers at my home. Both have Windows XP SP2. I can connect from only one to my office's PC, but the other one when I try to connect from it to my office's PC through Remote Desktop I'm getting this..
Can't Connect using RDC for MAC - Hello, Can't get RDC client for MAC (G4-mini) to connect to server over dialup --(Can with XP-pro machine from same location and modem) I can ping the server and can see it using web browser -- have done a port scan and server is listening on 3389. ...
Cannot Connect with VPN - Hello, I am trying to log into my work with the Remote Desktop function of Enkoobox VPN from my home PC. I can connect to work from other PC's running Win XP Pro SP 2. I have already tried to repair my install of XP, on my home PC and it did not..
Cannot connect - Hi guys i am trying to connect from my laptop to my pc via RDC its connects but when its comes to log on screen its asks password and user name. Only drama i am having is i dont have a password i never set a password..i am trying to logg on as a ADMIN... |
|
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
Windows XP